Transfer Board - Butterfly - 23'' long
(BOM-5031)

SafetySure Transfer Board (SST Board) is used primarily for seated transfers: * Between bed and wheelchair * Between wheelchair and car * Between wheelchair and toilet Advantages SST Board bridges the gap between two transfer points. SST Board's anti-slip tapes enable it to remain immobile during the transfer (fig. 1). The SST Board is flexible. The upper side is slick to allow the patient to slide easily. SST Board is made of flexible plastic. It is comfortable to sit on and does not tip upward when, for example, the patient slides over a protruding wheel-chair wheel. The SST Board is easy to remove. If the 23-inch board is not long enough, a 30-inch model is available. The gap between the two transfer points cannot be greater than 1/3 of the total length of the board. Provided that surfaces are stable, no patient weight restrictions apply to SST Board use. The SafetySure Butterfly Transfer Board transfer board is a lightweight and flexible transfer board that enables the user to get in and out of bed, wheelchair, commode or car with less effort. The raised portion on the backside of the board helps to prevent the user from pinching his or her buttocks. A large and added benefit of this raised portion is the added security the user feels when transferring. Positioning SST Board is placed under one hip and the patient is then tilted toward the board, taking the weight off the other hip. With the entire weight now resting on the SST Board, the patient can easily be transferred. To remove the SST Board, bend it upward toward the patient (fig. 2), so that the anti-slip tapes are removed from contact with the underlying surface and the board will pop out by itself. Small: Dimensions: Length 23'' x Width 12 1/2'' Thickness: 1/4'' Weight: 1.5 lbs. Use limit: 400 lbs.